Chequer Plate Floor Trunking

Chequer plate floor trunking is used to supply power services usually within workshop and warehousing environments.

Supplied in standard 2 metre lengths in a single compartment form.

A pre-determined grid design incorporating the position of the trunking and junction boxes is required for direct fixing to a ribbon screed of 15mm. During the main screeding operation it is essential to have the 1 metre cover sections fitted to prevent both ingress and distortion of the trunking side wall.

Trunking
pre galvanised to BSEN10143:1993
Formerly BS2989

Finish:
Self colour

Cover:
6mm O/P chequer plate

Finish:
Greyprimer

Non standard sizes,
profiles and finishes are
available to order

Chequer plate floor trunking							End Stop

Width mm	Depth mm	Thickness body mm	cover mm		Catalogue number		Catalogue number
100	50	1.60		6.00	CHP	422	CHP	428
75	75	1.60		6.00	CHP	332	CHP	338
150	75	1.60		6.00	CHP	632	CHP	638
225	75	1.60		6.00	CHP	932	CHP	938
100	100	1.60		6.00	CHP	442	CHP	448
150	100	1.60		6.00	CHP	642	CHP	648
225	100	1.60		6.00	CHP	942	CHP	948
150	150	1.60		6.00	CHP	662	CHP	668

Junction box							Riser bend

Width mm	Depth mm	Thickness body mm	cover mm		Catalogue number		Catalogue number
100	50	1.60		6.00	CHP	427	CHP	429
75	75	1.60		6.00	CHP	337	CHP	339
150	75	1.60		6.00	CHP	637	CHP	639
225	75	1.60		6.00	CHP	937	CHP	939
100	100	1.60		6.00	CHP	447	CHP	449
150	100	1.60		6.00	CHP	647	CHP	649
225	100	1.60		6.00	CHP	947	CHP	949
150	150	1.60		6.00	CHP	667	CHP	669

Chequer plate floor systems are also available in two and three compartment
options. For catalogue number add 2C (2 compartment) or 3C (3 compartment)
to the existing code.
Example: CHP6322C = 150x752 compartment trunking