Recessed Floor Trunking

Recessed floor trunking is used to supply power services usually within commercial, laboratory and hospital accommodation.

Supplied in standard 2 metre lengths in a single compartment form.

A pre-determined grid design incorporating the position of the trunking and junction boxes is required for direct fixing to a ribbon screed of 15mm. During the main screeding operation it is essential to have the 1 metre cover sections fitted to prevent both ingress and distortion of the trunking side wall.

Once screeded the system covers may be removed and fitted with the finished floor covering.

Trunking
pre galvanised to BSEN10143:1993
Formerly BS2989

Finish:
Self colour

 Non standard sizes,
profiles and finishes are
available to order

Recessed floor trunking End Stop
                   
Width mm Depth mm Thickness body mm cover mm   Catalogue number   Catalogue number
100 50 1.60   3.00     RF 422   RF 428  
75 75 1.60   3.00     RF 332   RF 338  
150 75 1.60   3.00     RF 632   RF 638
225 75 1.60 3.00 RF 932 RF 938
100 100 1.60 3.00 RF 442 RF 448
150 100 1.60 3.00 RF 642 RF 648
225 100 1.60 3.00 RF 942 RF 948
150 150 1.60 3.00 RF 662 RF 668

 

Junction box Riser bend
                   
Width mm Depth mm Thickness body mm cover mm   Catalogue number   Catalogue number
100 50 1.60   3.00     RF 427   RF 429  
75 75 1.60   3.00     RF 337   RF 339  
150 75 1.60   3.00     RF 637   RF 639
225 75 1.60 3.00 RF 937 RF 939
100 100 1.60 3.00 RF 447 RF 449
150 100 1.60 3.00 RF 647 RF 649
225 100 1.60 3.00 RF 947 RF 949
150 150 1.60 3.00 RF 667 RF 669
Recessed floor systems are also available in two and three compartmentoptions. For catalogue number add 2C (2 compartment) or 3C (3 compartment)to the existing code
Example: RF6322C = 150x752 compartment trunking