Shallow Floor Trunking

Shallow flush floor trunking is used to supply power, telephone and data services within office accommodation with a minimum screed depth of 40mm or in a wooden floor with a depth of 25mm. The service box requires a depth of 70mm to accommodate the sockets and plug tops.

Supplied in standard 2 metre lengths in two or three compartment options. Each length is supplied complete with cover and connector.

A predetermined grid design incorporating the position of the trunking, junction and service boxes is required for direct fixing to a ribbon screed of 15mm thick or a continuously supported wooden base. During the main screeding operation it is essential to have the cover sections fitted to prevent both ingress and distortion of the trunking side wall.

Trunking
pre galvanised to BSEN10143:1993
Formerly BS2989

Finish:
Self colour

Service outlet box:
pre galvanised to BSEN10143:1993
Formerly BS2989

Finish:
Powder coated
gray - RAL 7015

Non standard sizes,
profiles and finishes are
available to order
Flush floor trunking   modular
                   
Width mm Depth mm Thickness body mm Cover mm   Three Compartment   Four Compartment
315 60 1.25   3.0     FFL 9012      -    
403 60 1.25   3.0     FFL 9013      -    
403 60 1.25   3.0      -       FFL 9014  

Spare connector kit
                   
Width mm Depth mm Thickness body mm Cover mm   Three Compartment   Four Compartment
315 60 1.25    -     FFL 9051      -    
403 60 1.25    -     FFL 9052      -    
403 60 1.25    -      -       FFL 9052  

Spare cover kit   333mm long
                   
Width mm Depth mm Thickness body mm Cover mm   Three Compartment   Four Compartment
315 60 1.25   3.0     FFL 9021      -    
403 60 1.25   3.0     FFL 9022      -    
403 60 1.25   3.0      -       FFL 9022  

 

90 riser bend
             
Width mm Depth mm Thickness mm Three Compartment   Four Compartment
315 60 1.25 FFL 9042      -    
403 60 1.25 FFL 9043      -    
403 60 1.25  -       FFL 9044  
End stop
             
Width mm Depth mm Thickness mm Three Compartment   Four Compartment
315 60 1.25 FFL 9031      -    
403 60 1.25 FFL 9032      -    
403 60 1.25  -       FFL 9032  

 


Base entry skirting unit
 
Width mm Depth mm Thickness mm Three Compartment   Four Compartment Skirting catalogue number
315 60 1.25 FFL 9045      -       SA 16  
403 60 1.25 FFL 9046      -       SA 16  
403 60 1.25  -       FFL 9047     *    
    *  To be agreed at point of order
The unit will be supplied for use withthe skirting system as shown in the table unless otherwise specified

 

Junction box
 
Width mm Depth mm Thickness body mm cover mm   Three Compartment Four Compartment
315 60 1.25   3.0     FFL 9020      -    
403 60 1.25   3.0     FFL 9030     -    
403 60 1.25   3.0      -       FFL 9040  
Junction boxes are supplied with flyovers.

 


Service outlet box
 
Width mm Depth mm Thickness body mm cover mm   Three Compartment Four Compartment
315 60 1.25   3.0     FFL 933      -  
403 60 1.25   3.0     FFL 934     -  
403 60 1.25   3.0      -       FFL 935
Service outlet boxes are supplied without outlet plates - refer to  page 27 for the full range.
Note:
Outlet plates FSB 010, FSB 020 and FSB 030 cannot be used with theflush floor service outlet box when power socket are fitted.